Kid Giddy Sizzix Doll Bubble Dress Tutorial

Happy Friday everyone! Thank you for all the Bubbles love...I love creating these little dolls and their characters - so I'm thrilled when you all enjoy them. If you loved Bubbles and her outfit, I'm sharing how I put it all together, so you can make one too. I decided to make her a dress with a "bubble skirt" (hence her name) but if you just want to make a regular dress skirt, I'm providing the instructions too which are a little different than the photos shown.
As a reminder - Bubbles is made using my Sizzix Kid Giddy Doll die (for the head and body) and the Sizzix Kid Giddy Fox die (for the arms and legs).

Step 1: Cut 4 body pieces. This can be all the same fabric, but I used two so this tutorial is less confusing. I also wanted the bottom to be different than her dress so it 'looked' like she was wearing undies. Cut your top piece across the midsection so it's 2 1/2" from top to bottom. The bottom piece should be cut from the bottom up so it's 1/2" overlapped with the top piece. In this picture above, you'll see a skin tone fabric piece underneath the other two. This is only to illustrate how if you line up the two pieces to the skin tone piece, they must overlap each other to account for the seam allowance.  If you don't account for the seam allowance, the doll's body will be shorter than intended. So my measurements don't really matter - you can place the dress seam where you want, just make sure they overlap by 1/2".
Step 2: Sew the two top body pieces right sides together, side seams only. Repeat this for the bottom portion of the body as well.

Step 3: Cut a piece of fabric that is 9" wide by approx 19 1/2" long if you are making a dress with the bubble skirt. Sew the short ends together and press open the seam. ((Please note: If you have a ruffler foot, PLEASE test a length of 19 1/2" fabric to see how long it is once ruffled before continuing))
If you don't want to make a "bubble" skirt: cut your fabric approx 5" x 19 1/2". Skip to step 5.

Step 4: Fold the fabric in half, wrong sides together, and pin the seams together to keep them aligned. Because this is a bubble skirt, if you want to add fluff, tulle or anything else (to bubble it out), now is the time to do that. 

Step 5: Gather the entire raw edge of the skirt so the circumference is the same as the bottom raw edge of the top body piece. Depending on where you cut the body piece, this could be different for everyone. I also used a ruffler foot and know the settings for my measurements - so please keep in mind your measurements could be different than mine. If you are gathering by hand or using a very long basic stitch, it could be easier to mark various increments to line up along the body seam. 
If you are not making a bubble skirt, match up the ruffled edge to your body piece, and stitch the end seam together (which will be in the center back of the doll) and trim seam allowance accordingly.

Step 6: Turn the top body piece right side out, the bottom body piece wrong side out and the skirt wrong side out (if not making a bubble skirt).

Step 7: Slip the skirt over the top body piece and pin in place. The raw edge of the skirt should be lined up to the bottom raw edge of the top body piece. Do not line it up to the neck seam.

Step 8: Slip the bottom body piece over the skirt and pin in place. This can be tricky because the top and bottom seam of the bottom body portion are almost the same. Be sure you are connecting the middle of the bottom portion to the raw edges.

Step 9: Sew around the raw edge and pull the bottom portion down.

Step 10: Flip the skirt dress down to show the top of the body and finish the doll according to directions with the die. If you didn't make a bubble skirt, roll a double hem along the bottom raw edge and top stitch along the fold.

Step 11: If you want to make a puffy sleeve cut your fabric in the manner shown above. Although this shows the doll arm, you can do the same for the fox arm (as I did but forgot to take a picture of). Make the top edge the same width as the top of the arm, and the bottom wider. Stitch the side seams together and sew a piece of elastic to the bottom edge to gather it into a puffy sleeve.
Step 12: To make the capris, please see all my additional instructions on the sizzix website under projects for the doll. The instructions apply to the fox arms and legs as well.
Step 13:  To make her hair buns, I use 1/2" strips of bamboo blend felt braided together. Roll the braid pieces up to make the bun as small or as large as you want. On the underside, using a long piece of thread, secure all the pieces from one side to another all the way around the bun. Stitch the bun to the doll head in the desired place.

Do you know about the #SewMyself Doll Challenge hosted by GenQ magazine and sponsored by Sizzix? I recently shared how I made some of my Little House on the Prairie look a like dolls for more ideas to make your own for the contest. Head over to Gen Q to check it out.


If you have any questions about this tutorial, please leave me a comment below so I can answer it for all to see and benefit from as well.

Please sign up for my emails to get info about new patterns, new dies, future sales and other fun stuff. I have yet to send out my first one - but I will soon and will surely include something fun.